30 chapter 2 control panel enww – HP LaserJet M9040M9050 Multifunction Printer series User Manual
Page 44
Menu item
Sub-menu item
Sub-menu item
Values and Description
Select
Yes
to choose this test, or
No
to not choose it.
HTTP Test
This test checks operation of HTTP by retrieving
predefined pages from the device, and tests the
embedded Web server.
Select
Yes
to choose this test, or
No
to not choose it.
SNMP Test
This test checks operation of SNMP communications
by accessing predefined SNMP objects on the device.
Select
Yes
to choose this test, or
No
to not choose it.
Select All Tests
Use this item to select all available embedded tests.
Select
Yes
to choose all tests. Select
No
to select
individual tests.
Data Path Test
This test helps to identify data path and corruption
problems on an HP postscript level 3 emulation device.
It sends a predefined PS file to the device, However,
the test is paperless; the file will not print.
Select
Yes
to choose this test, or
No
to not choose it.
Execution Time [H]
Use this item to specify the length of time (in hours) that
an embedded test will be run. You can select a value
from 1 to 60 hours. If you select zero (0), the test runs
indefinitely until an error occurs or device is turned off.
Data gathered from the HTTP, SNMP, and Data Path
tests is printed after the tests have completed.
Execute
No
*: Do not initiate the selected tests.
Yes
: Initiate the selected tests.
Table 2-10
Jetdirect menus (continued)
30
Chapter 2 Control panel
ENWW