HP LaserJet M9040M9050 Multifunction Printer series - Manual (Page 33)

Default Fax Options
Administration > Default Job Options > Default Fax Options
NOTE: This menu is only available if the HP LaserJet Analog Fax Accessory 300 is installed.
Table 2-4 Fax Send menu
Menu item Sub-menu item Values Description
Resolution Standard (100x200dpi)
(default)
Fine (200x200dpi)
Superfine (300x300dpi)
Set the resolution for sent documents. Higher
resolution images have more dots per inch (dpi), so
they show more detail. Lower resolution images have
fewer dots per inch and show less detail, but the file
size is smaller.
Fax Header Prepend (default)
Overlay
Select the position of the fax header on the page.
Select Prepend to print the fax header above the fax
content and move the fax content down on the page.
Select
Overlay to print the fax header over the top of
the fax contents without moving the contents down.
Using
Overlay could prevent a single-page fax from
flowing onto another page.
Table 2-5 Fax Receive menu
Menu item Values Description
Fax Forwarding Fax Forwarding
Change PIN
To forward received faxes to another fax device, select Fax
Forwarding and Custom . Then type the number of the other fax
device into the Forward to Number field. When you select this menu
item for the first time, you are prompted to set up a PIN. Type that
PIN every time you use this menu. This is the same PIN that is used
to access the Fax Printing menu. This PIN is exactly four digits.
Stamp Received Faxes Enabled
Disabled (default)
Add the date, time, senders phone number, and page number to each
page of the faxes that this device receives.
Fit to Page Enabled (default)
Disabled
Shrink faxes that are larger than Letter-size or A4-size so that they
can fit onto a Letter-size or A4-size page. If it this feature set to
Disabled , faxes larger than Letter or A4 will flow across multiple
pages.
Fax Paper Tray Select Automatic or a specific
tray.
Select the tray that holds the size and type of paper that you want to
use for incoming faxes.
Output Bin Select the default output bin, if applicable, to use for faxes.
ENWW Use the Administration menu 19