HP LaserJet M9040M9050 Multifunction Printer series - Manual (Page 200)

Economy settings
Sleep and wake
Set the sleep delay
Use the sleep-delay feature to set the period of time that the MFP must be idle before it enters the sleep
mode. The default setting is 45 minutes.
1. Scroll to and touch Administration .
2. Touch Time/Scheduling .
3. Touch Sleep Delay .
4. Touch the sleep-delay setting that you want.
Set the sleep time
Use the sleep time feature to put the MFP in sleep mode at a set time each day.
1. Scroll to and touch Administration .
2. Touch Time/Scheduling .
3. Touch Sleep Time .
4. Touch the day of the week for the sleep time.
5. Touch Custom .
6. Touch Save .
7. Touch the appropriate options to set the correct hour, minute, and AM/PM setting.
8. If you want to put the MFP in sleep mode at the same time every day (including weekends), on the
Apply to All Days screen, touch
Yes . If you want to set the time for individual days, touch No , and
repeat the procedure for each day.
Set the wake time
Use the wake time feature to wake the MFP at a set time each day.
1. Scroll to and touch Administration .
2. Touch Time/Scheduling .
3. Touch Wake Time .
4. Touch the day of the week for the wake time.
5. Touch Custom .
6. Touch Save .
186 Chapter 11 Manage and maintain ENWW