Determining solve mfp problems – HP LaserJet M9040M9050 Multifunction Printer series User Manual
Page 205
Determining Solve MFP problems
Situation/Message
Solution
The control-panel display is blank, and internal fans are not
running.
Make sure that the MFP power is on. Press all the keys to see
if one is stuck. Contact your HP-authorized service
representative if these steps do not work.
The MFP is turned on, but the internal fans are not running.
Make sure that the line voltage is correct for the MFP power
configuration. (See the label on the back of the device for
voltage requirements.) If you are using a power strip and its
voltage is not within specification, plug the MFP directly into
the power receptacle.
The MFP voltage is not correct.
Make sure that the line voltage is in the correct range. (See the
label on the back of the device for voltage requirements.)
Messages appear on the control-panel display.
See
Control-panel messages on page 193
Print media is jammed in the MFP.
Check for jams. For more information, see
.
The control-panel display shows the wrong language or
unfamiliar characters.
Reconfigure the control-panel display language.
Turn the MFP off and then on.
Administration
>
Device Behavior
>
Language
An error occurs during a Digital Send job. Job failed.
The MFP experienced an error during the digital sending job.
The administrator should check on the status of the SMTP
server. See
Solve e-mail problems on page 233
.
The e-mail gateway could not accept the job because the
attachment is too large.
Reduce the size of the e-mail attachment by setting the
maximum attachment size. Set the maximum attachment size
on the Digital Sending tab of the embedded Web server. See
Embedded Web server on page 152
.
Try using a different file format or sending the document a few
pages at a time.
A network connection is required for digital sending
The MFP cannot find a network connection. The administrator
should check to see if the MFP is connected to the network.
See
Solve network connectivity problems on page 234
.
ENWW
Determining Solve MFP problems 191