HP LaserJet M9040M9050 Multifunction Printer series - Manual (Page 211)

2. Open and close the right door to reset the MFP.
Figure 12-9 Clear jams in tray 1 (2 of 2)
Clear jams inside the right door
1. Open the right door.
Figure 12-10 Clear jams inside the right door (1 of 3)
2. Check for media in the right door area, and remove any media from this area. Carefully check to
be sure you have removed all pieces of torn media.
3. Open the jam access cover. Pull out and lift the green tab.
Figure 12-11 Clear jams inside the right door (2 of 3)
4. Remove any media from this area by pulling it out of the MFP.
5. Push the green lever down to the original position.
Figure 12-12 Clear jams inside the right door (3 of 3)
6. Close the right door.
ENWW Clear jams 197