HP ProLiant SL165z G7 Server - Manual (Page 39)

Using LO100 39
3. Select Pointer Options.
4. In the Pointer Options window:
a. Set the Pointer speed bar in the middle.
b. Be sure the Enhance pointer precision option is not selected.
To change the Hardware Acceleration option:
1. Right-click the desktop screen
2. Select Properties. The Display Properties window appears.
3. Click Settings>Advanced. The video card and monitor properties window appears.
4. Click Troubleshoot.
5. Set hardware acceleration to None to disable cursor and bitmap accelerations (one scale or option
below Full).
6. Click Apply.
7. Click OK to exit the Display Properties window.
For Linux operating systems, perform the following steps:
• For SLES 9:
a. Determine which mouse device is the remote console mouse using the xsetpointer -l
command to list all mouse devices.
b. Determine which mouse to modify by cross-referencing the output of xsetpointer with the X
configuration (either /etc/X11/XF86Config or /etc/X11/xorg.conf.)
c. Select the remote console mouse as the mouse to modify. For example:
xsetpointer Mouse[2]
d. Set the acceleration parameters. For example:
xset m 1 1
• For Red Hat Enterprise Linux, set the acceleration parameters using:
xset m 1 1
System buttons
On the virtual keyboard, there are eight different system buttons: LCtrl, LWin, LAlt, RAlt, RWin, RCtrl,
Context, and [Lock]. These buttons can be used as virtual keys and are similar to the keys the physical
keyboard of your local machine.
For example, when you press the Ctrl+Alt+Del keys on the physical keyboard, the Task Manager of your
local machine appears in addition to the task manager on the server, or the key combination unlocks the
server for login. To display the Task Manager of the remote server by pressing similar virtual keys, on the
LO 100 remote graphic console window, click LCtrl click LAlt, and then press the Del key on your physical
keyboard. Using this key combination displays the LO100 remote graphic console Task Manager. You
can use any combination of virtual and physical Alt, Ctrl, and Del keys.
• Lock and special buttons, when pressed, remain in a pressed state until released. To release special
buttons, click [Lock], and press the system buttons.
• Selecting or pairing LCtrl and RCtrl, LAlt and RAlt, LWin and RWin function as they would on an
English language keyboard. However, they might function differently on keyboards of other
languages.