HP ProLiant SL165z G7 Server - Manual (Page 27)

Using LO100 27
Logging in to LO100
You can log in to the remote management processor through a web browser (" Logging in through a web
browser " on page 27 ) or through the CLP (" Logging in through the CLP " on page 27 ). If you are unsure of
your DHCP IP address, refer to the "Configuring network access" section.
Logging in through a web browser
1. Browse to the IP address of the remote management processor to access the login screen.
2. Enter your user name and password. The default user name for the Administrator account is admin,
and the default password is admin. The default user name for the Operator account is Operator,
and the default password is Operator.
Logging in through the CLP
1. Establish a connection to the remote management processor by launching a telnet session or an SSH
session.
2. Enter the user name at the login prompt. The default user name for the Administrator account is
admin. The default user name for the Operator account is Operator.
3. Enter the password at the password prompt. The default password for the Administrator account is
admin. The default password for the Operator account is Operator.
4. To exit the CLP and enter Console mode, enter the exit command at the command prompt.