HP Netserver E Server series - Manual (Page 29)

25
5 Error Message Reference
Error Messages and Their Sources
Errors are designated by a hexadecimal number. These numbers are listed in this chapter with a
simple description of their meaning and some actions the user can take to try to isolate the source
of the error. Brief descriptions of the tests which generate each type of error are listed within the
error message table.
Table 3-1. Error Codes Number Ranges
System Board Error Codes 0001h-00CCh
Memory Error Codes 0100h-01A4h
Floppy Disk Error Codes 0301h-03FFh
Keyboard Error Codes 0400h-04FFh
SCSI Error Codes 0500h-0590h
Serial Port Error Codes 0601h-0617h
Parallel Port Error Codes 0701h-0708h
Speaker Error Code 0810h
Video Error Codes 0900h-090Fh
CD ROM Error Codes 0A00h-0A12h
MP Error Codes 1000h-1083h
The System Tests
The tests included in the System Test Menu exercise the basic functionality of the CPU, ensuring
that the registers, the flags, and both the basic and protected instructions work as expected. It
includes tests of the chip speed as well as the operation of integrated controllers for coprocessing,
DMA, interrupts, and the timers and clock functionality. Specialized tests for PCI devices, Plug
and Play devices, and MMX instructions are also included.
Code Description Recommended Action
0001h Cannot load the
Machine Status
Word. Make sure the CPU is seated properly. If the test still shows failure, replace the
CPU.
0002h Cannot load the
Global Descriptor
Table Register Make sure the CPU is seated properly or replace the CPU.
0003h Cannot load the
IDT(Interrupt
Descriptor Table)
Register. Make sure the CPU is seated properly or replace the CPU.
0004h ARPL instruction
execution error. Make sure the CPU is seated properly or replace the CPU.
0005h Load Access Rights
Byte instruction
execution error. Make sure the CPU is seated properly or replace the CPU.
0006h Load Segment Limit Make sure the CPU is seated properly or replace the CPU.