Node characteristics, Example 4-1. node characteristics for \nodea – HP Integrity NonStop J-Series User Manual
Page 77
Guardian Performance Analyzer (GPA) User Guide
– (544541-006) Page 77 of 131
Node Characteristics
The Node Characteristics subsection of the GPA report for \NODEA (Example 4-1) shows
the following:
The node has a total of 4 processors, 32 megabytes of memory, and 9 disk
volumes.
There were 264 static (steady-state) processes and 11 dynamic (transient)
processes on the node during the measurement period.
The most utilized processor is CPU 1, the least utilized processor is CPU 3, and
the average processor busy time is 36.2 percent.
The average disk volume busy time is 2.8 percent and the average disk process
busy time is 3.3 percent.
The system resources are being utilized at 55.7 percent of the maximum
recommended level.
The data indicate that this is a small- to moderate-sized system running at well below the
maximum recommended level.
Example 4-1. Node Characteristics for \NODEA
I. NODE CHARACTERISTICS MEASURED MAX VALUE
VALUE EXPECTED
CPU TYPE : TXT/TNSII
CPU COUNT : 4 16
TOTAL MEMORY : 32 84
VOLUME COUNT : 9 512
STATIC PCBS : 264 1024
DYNAMIC PCBS : 11 0
OUT OF BALANCE CPU COUNT : 2 0
MOST BUSY CPU : 1
LEAST BUSY CPU : 3
AVG CPU BUSY : 36.2 65.00
AVG DISK VOLUME BUSY : 2.8 24 %
AVG DISK PROCESS BUSY : 3.3 24 %
% - RECOMMENDED RESOURCES: 55.7 100
NODE SWAP RATE : 2.3 1 CAUSE:MEMORY