HP Integrity BL870c i2 Server-Blade - Manual (Page 99)

Configuring the Virtual Connect domain using the CLI 99
• LDAP Authentication
>ssh 192.168.0.120
login as:
password:
Domain setup
A Virtual Connect domain consists of an enclosure and a set of associated modules and server blades that
are managed together by a single instance of the Virtual Connect Manager. the Virtual Connect domain
contains specified networks, server profiles, and user accounts that simplify the setup and administration
of server connections. Establishing a Virtual Connect domain enables administrators to upgrade, replace,
or move servers within their enclosures without changes being visible to the external LAN/SAN
environments.
Before starting, perform the following tasks:
• Verify that the Onboard Administrator is running the latest firmware.
• Locate the Default Network Settings label attached to the Ethernet module in bay 1 of the primary
enclosure and note the following information:
o DNS name
o User name
o Password
• Connect any Ethernet module stacking cables
After logging in, perform the following tasks to set up the domain:
1. Import the enclosure.
2. Name the domain.
3. Set up local user accounts and privileges.
Importing an enclosure
Enter OA credentials during import:
>import enclosure username=Administrator password=myPassword
or
>import enclosure username=Administrator
Password=*****
Setting the domain name
To set the domain name, use the set domain command:
>set domain name=MyNewDomainName
The Virtual Connect domain name must be unique within the data center, and can be up to 64 characters
without spaces or special characters.
Configuring local users
• Add a new user
>add user bob password=fhkjdhfk privileges=domain,network