HP Integrity BL870c i2 Server-Blade - Manual (Page 65)

Command line 65
Item Description
show systemlog Display the Virtual Connect manager system log.
Syntax show systemlog [-Last=] [-First=] [-Pause=]
Options
Last Display the last n records. If this option is specified and no value is provided,
the default is the last 10 records.
First Display the first n records. If this option is specified and no value is provided,
the default is the first 10 records.
Pause Number of records to be viewed before prompting for key press. Valid values
include numbers between 1 and 40.
Examples
->show systemlog
Displays the entire system log
->show systemlog -pause=8
Displays the system log, eight records at a time
->show systemlog -first=12
Displays the first twelve records from the system log
->show systemlog -last=8
Displays the last eight records from the system log
->show systemlog -last=20 -pause=6
Displays the last twenty records from the system log, six records at a time
To add a remote target, see "add log-target (on page 37 )."
uplinkport
Manage interconnect module uplink ports.
Supported actions: add, help, remove, set, show
Item Description
add uplinkport Add a new uplink port to an existing network or a shared uplink port set.
Syntax add uplinkport [Network= |
UplinkSet=]
[Speed=]
[Role=]
Parameter
PortID
(required)
The ID of an uplink port to add. The ID is a combination of the enclosure name,
interconnect bay, and port number in a single descriptor. The format of the port ID
is "::".
Properties
Network
(required)
The name of an existing network to which the port is added if the uplink set name
has not been specified.
UplinkSet
(required)
The name of an existing shared uplink port set to which the port is added if the
network name has not been specified.
Speed (optional) Specifies the port speed for the port (optional). Valid values include "Auto",
"10Mb", "100Mb", "1Gb", "10Gb", and "Disabled". If not specified, the default