HP Integrity BL870c i2 Server-Blade - Manual (Page 72)

Command line 72
Item Description
StrongPasswords
(optional)
Enables or disables strong password enforcement. If enabled, then new, local
users that are created are validated against the password characteristics
specified. Valid values include: "Enabled" and "Disabled".
MinPasswordLength
(optional)
The minimum password length allowed for new passwords when adding a new
user and when changing an existing password. The default value is 3.
Examples
->set user-security StrongPasswords=Enabled
Enables strong user password enforcement
->set user-security StrongPasswords=Disabled
Disables strong user password enforcement
->set user-security MinPasswordLength=10
Modifies the minimum password length
Item Description
show user-security Display general domain user security settings.
Syntax
show user-security
Example
->show user-security
Displays user security settings
vcm
Reset the Virtual Connect Manager.
Supported actions: help, reset
Item Description
reset vcm Reset the Virtual Connect Manager. A failover to the standby VCM may
also be specified (optional), if there is a standby VCM available.
IMPORTANT: Resetting the VCM causes a temporary loss in connectivity
with the Virtual Connect Manager. If failover is specified and there is a
standby VCM, users are logged off and must reconnect using the
standby VCM IP address.
Syntax reset vcm [-failover]
Option
Failover Forces a failover from the current primary Virtual Connect Manager to
the standby manager
Examples
->reset vcm
Resets the Virtual Connect Manager
->reset vcm -failover
Resets the Virtual Connect Manager and forces a failover to the standby
VCM (if available)