HP Integrity BL870c i2 Server-Blade - Manual (Page 59)

Command line 59
Item Description
set snmp-trap Modifies an existing SNMP trap destination
Syntax set snmp-trap [Name=
name>][Address=
address>][Community=
string>][Format=][Severity=
severity | All|None>][DomainCategory=
category | All|None>][EnetCategory=
All|None>][FcCategory=]
Parameter
TrapName
(required)
The name of the trap to be modified
Properties
Name New name of the trap
Address (required) IPv4 address or DNS name for the trap destination
Community
(optional)
The SNMP community name string for the specified trap. For VC-Enet modules,
the maximum string length is 39. For VC-FC modules, the maximum string length
is 24. If not specified, the default community name is "public".
Format Format of the new trap. Valid values are "SNMP1v" and "SNMPv2". The
default is "SNMPv1".
Severity Trap severities to send to the destination. Valid values are "Normal",
"Unknown", "Info", "Warning", "Minor", "Major", "Critical", "All", and
"None".
Multiple severities can be provided, separated by commas. The default severity
is "None".
DomainCategories The Virtual Connect Domain trap categories to send to the destination. Valid
values are "Legacy", "DomainStatus", "NetworkStatus", "FabricStatus",
"ProfileStatus", "ServerStatus", "EnetStatus", FcStatus", "All", and "None".
Multiple categories can be specified, separated by commas.
EnetCategories The Virtual Connect Ethernet trap categories to send to the destination. Valid
values are "PortStatus", "PortThreshold", "Other", "All", and "None".
Multiple categories can be specified, separated by commas.
FcCategories The Virtual Connect Fibre Channel trap categories to send to the destination.
Valid values are "PortStatus", "Other", "All", and "None".
Multiple categories can be specified, separated by commas.
Examples
->set snmp-trap MyTrap1 Community=public
Sets the trap community
->set snmp-trap MyTrap1 Severity=All FcCategories=None
EnetCategories=None
Sets all trap severities, and also sets the Fibre Channel and Ethernet categories
to none
Item Description
->show snmp-trap Displays the SNMP traps that have been configured
Syntax show snmp-trap [Name| *]
Parameter