HP Integrity BL870c i2 Server-Blade - Manual (Page 66)

Command line 66
Item Description
port speed is "Auto".
If there is no connector present on the uplink port, only "Auto" and "Disabled" can
be configured as a possible speed. Speed restrictions apply.
Role (optional) The role played by the port if the connection mode of the network or shared uplink
set is selected as "Failover". The default is "Primary".
Examples
->add uplinkport enc0:1:1 Network=MyNetwork
Adds a new uplink port (Bay 1, Port 1) to a network
->add uplinkport enc0:2:4 Network=MyNetwork Speed=1Gb
Adds a new uplink port (Bay 2, Port 4) to a network and sets the port speed
->add uplinkport enc0:2:3 UplinkSet=MyUplinkSet
Adds a new uplink port (Bay 2, Port 3) to a shared uplink port set
->add uplinkport enc0:2:4 Network=MyNetwork Role=Primary
Adds a new uplink port to a network with the connection mode as Failover and the
port role as Primary
Item Description
remove
uplinkport
Remove an uplink port element from a network or a shared uplink port set.
Syntax remove uplinkport [Network= |
UplinkSet=]
Parameters
PortID
(required)
The ID of the port to remove from a network. The port ID must be in the format
::
If EnclosureID is not specified, it defaults to the local enclosure.
Network
(optional)
The name of the network from which the port is to be removed
UplinkSet
(optional)
The name of the shared uplink port set from which the port is to be removed
Examples
->remove uplinkport enc0:1:2 Network=MyNetwork
Removes a specific uplink port (Bay 1, Port 2) from a network
->remove uplinkport * Network=BlueNetwork
Removes all uplink ports from a network named "BlueNetwork"
->remove uplinkport enc0:2:3 UplinkSet=SharedUplinkSet1
Removes a specific uplink port (Bay 2, Port 3) from a shared uplink set
Item Description
set uplinkport Modify an uplink port that exists as a member of a network or shared uplink port
set.
Syntax set uplinkport [Network= |
UplinkSet=][Speed=
isabled>] [Role=]
Parameter
PortID
(required)
The ID of the port to modify. The specified port must already be added to a network
or uplink port set. The port ID is in the format