HP Integrity BL870c i2 Server-Blade - Manual (Page 30)

Command line 30
Item Description
->add fc-connection MyNewProfile
Adds a new FC SAN connection and uses the next available fabric
->add fc-connection MyNewProfile AddressType=Factory-
Default
Adds a new FC SAN connection and uses factory-default addresses
->add fc-connection MyNewProfile AddressType=User-
Defined PortWWN=50:06:0B:00:00:C2:62:00
NodeWWN=50:06:0B:00:00:c2:62:01
Adds a new FC SAN connection and provides user-defined WWN
addresses
Item Description
remove fc-connection Remove the last FC connection from an existing server profile.
Syntax remove fc-connection
Parameter
ProfileName
(required)
The name of an existing profile from which the last FC connection is to be
removed
Example
->remove fc-connection MyProfile
Removes an FC connection from a profile
Item Description
set fc-connection Modify an existing FC SAN connection.
Syntax set fc-connection
[Fabric=]
[Speed=]
[BootPriority=] [BootPort=]
[BootLun=]
Parameters
ProfileName
(required)
The name of the server profile that contains the connection to modify
Port (required) The port number of the connection being modified
Properties
Fabric (optional) The name of the FC SAN fabric to associate with the connection. The fabric
being specified should be associated with the same bay as the FC
connection. A blank string makes the FC connection unassigned.
Speed (optional) The port speed of the FC SAN connection. Valid values include "Auto",
"8Gb", "4Gb", "2Gb", "1Gb", and "Disabled".
Speed restrictions:
For the HP 4Gb VC-FC Module and HP Virtual Connect 4Gb FC Module,
supported speed values include "Auto","1Gb","2Gb", and "4Gb", and
"Disabled". If the value is set to 8Gb, the speed is auto-negotiated by Virtual
Connect.
BootPriority
(optional)
Controls whether the FC HBA port is enabled for SAN boot and affects the
BIOS boot order. Valid values include "BIOS", "Primary", "Secondary", and
"Disabled".