HP Integrity BL870c i2 Server-Blade - Manual (Page 24)

Command line 24
Item Description
Setting the value to "true" restricts the server network connections to be
selected from a single shared uplink, and the VLAN ID cannot be modified.
Setting the value to "false" enables the user to select any VC Ethernet network
for the server Ethernet connections, and VLAN ID mappings can be modified
to ensure uniqueness.
SharedServerVLanId can be "true" only if VLanTagControl is set to "Map".
PrefSpeedType
(optional)
The default connection speed for any Ethernet connection using multiple
networks. Valid values include "Auto" and "Custom". "Custom" allows the
user to configure the preferred speed. The default value is "Auto".
PrefSpeed (required
if PrefSpeedType is
Custom)
The default connection speed for any Ethernet connection using multiple
networks. Valid values range from 100Mb to 10Gb in 100Mb increments.
MaxSpeedType
(optional)
Maximum connection speed for any Ethernet connection using multiple
networks. Valid values include "UnRestricted" and "Custom". "Custom"
allows the user to configure the preferred speed. The default value is
"Unrestricted".
MaxSpeed (required
if MaxpeedType is
Custom)
The maximum connection speed for any Ethernet connection using multiple
networks. Valid values range from: 100Mb to 10Gb in 100Mb increments.
Examples
->set enet-vlan VLanTagControl=Map
SharedServerVLanId=true
Sets the VLanTagControl to Map and SharedServerVLanId to Enabled
->set enet-vlan PrefSpeedType=Custom PrefSpeed=500
MaxSpeedType=Custom MaxSpeed=2500
Sets the preferred connection speed for all connections using multiple
networks to 500Mb, and the maximum connection speed to 2.5Gb
Item Description
show enet-vlan Display general Ethernet VLAN configuration settings.
Syntax show enet-vlan
Example
->show enet-vlan
Displays Ethernet VLAN configuration settings
external-manager
Manage external manager settings and information.
Supported actions: remove, help, set, show
Item Description
remove external-
manager
Remove an existing external manager (VCEM) and regain local management
profile control of the domain.
When releasing the profile control, it is mandatory to specify values for each
MacType, WwnType, and ServerIdType.
Syntax remove external-manager [-quiet] [UserName=]
[MacType=] [MacStart=