HP Integrity BL870c i2 Server-Blade - Manual (Page 48)

Command line 48
Item Description
->add profile MyNewProfile SNType=User-Defined
SerialNumber=VCX0113121 UUID=15713c60-fcf2-11dc-a656-
0002a5d5c51b
Creates a new profile and specifies a custom virtual serial number and UUID
Item Description
assign profile Assign a server profile to a device bay.
Syntax assign profile [-PowerOn]
Parameters
ProfileName
(required)
The unique name of the server profile to assign
DeviceBay
(required)
The device bay to assign the profile to, in the format
:
If EnclosureID is not specified, it defaults to the local enclosure.
To assign a profile to a multi-blade server, must be a monarch
bay.
Option
PowerOn Powers on the server after the profile has been assigned.
Example
->assign profile MyProfile1 enc0:1
Assigns a profile to device bay 1 of the primary enclosure
->assign profile MyProfile1 enc0:5
Assigns a profile to a multi-blade server in bays 5-8 of the primary enclosure
Item Description
remove profile Remove one or more server profiles from the domain.
Syntax remove profile
Parameter
ProfileName
(required)
The name of an existing profile in the VC domain. "*" removes all the existing
profiles.
Examples
->remove profile MyProfile
Removes a server profile by name
->remove profile *
Removes all server profiles
Item Description
set profile Modify properties of an existing server profile.
Syntax set profile [Name=]
[EFIState=absent]
Parameter
ProfileName
(required)
The current name of the profile to modify
Properties