HP Integrity BL870c i2 Server-Blade - Manual (Page 96)

Command line 96
Name RFC Description
PH 29.8).
numLossOfSync FCMGMT
-MIB
connUnitPortStatCountLossofSynchroni
zation - Count of instances of
synchronization loss detected at port.
This count is part of the Link Error
Status Block (LESB). (FC-PH 29.8).
Note
numMcastFramesRx FCMGMT
-MIB
connUnitPortStatCountRxMulticastObje
cts - Count of Multicast Frames or
Packets received at this port.
numMcastFramesTx FCMGMT
-MIB
connUnitPortStatCountTxMulticastObje
cts - Count of Multicast Frames or
Packets transmitted out this port.
numMcastTimeouts N/A Number of timeouts reported for
multicast frames. A single frame could
cause this counter to increment if it
timed out for each multiple
destination.
numPrimitiveSeqProtoc
olErr
FCMGMT
-MIB
connUnitPortStatCountPrimitiveSequen
ceProtocolErrors - Count of primitive
sequence protocol errors detected at
this port. This count is part of the Link
Error Status Block (LESB). (FC-PH
29.8).
numRxBadEOFs N/A The number of frames received with a
badly formed end-of-frame.
numRxCRCs N/A Received frames: the number of CRC
errors detected.
numRxClass1Frames FCMGMT
-MIB
connUnitPortStatCountClass1RxFrames
- Count of Class 1 Frames received at
this port. Note, this is a Fibre Channel
only stat.
numRxClass2Frames FCMGMT
-MIB
connUnitPortStatCountClass2RxFrames
- Count of Class 2 Frames received at
this port
numRxClass3Frames FCMGMT
-MIB
connUnitPortStatCountClass3RxFrames
- Count of Class 3 Frames received at
this port.
numRxLCs N/A Number of link control frames
received at this port
numRxOfflineSequenc
es
FCMGMT
-MIB
connUnitPortStatCountRxOfflineSeque
nces - Count of Offline Primitive OLS
received at this port.
rxBytePeakRate N/A Receive max byte rate since last reset -
(bytes/sec)
rxByteRate N/A Receive instantaneous byte rate -
(bytes/sec)
rxFramePeakRate N/A Receive max frame rate since last reset