HP LaserJet Pro 200 color MFP M276nw - Manual (Page 189)

6. Select a type from the Media-type drop-down list.
7. Click the Print button.
Check toner cartridge status
If you determine that you need to replace a toner cartridge, print the supplies status page to find the
part number for the correct genuine HP toner cartridge.
Print the supplies status page
Information pages reside within the product memory. These pages help diagnose and solve problems
with the product.
NOTE: If the product language was not correctly set during installation, you can set the language
manually so the information pages print in one of the supported languages. Change the language by
using the System Setup menu on the control panel or the embedded Web server.
1. From the Home screen, touch the Setup button.
2. Touch the Reports button.
3. Touch the Supplies Status button to print the report.
Check the supplies status
Check the supplies status page for the following information:
● Estimated percentage of cartridge life remaining
● Approximate pages remaining
● Part numbers for HP toner cartridges
● Number of pages printed
Calibrate the product to align the colors
If the printed output has colored shadows, blurry graphics, or areas that have poor color, you might
need to calibrate the product to align the colors. Print the diagnostics page from the Reports menu on
the control panel to check the color alignment. If the blocks of color on that page are not aligned with
each other, you need to calibrate the product.
1. On the product control panel, open the System Setup menu.
2. Open the Print Quality menu, and select the Color Calibration item.
3. Select the Calibrate Now option.
ENWW Improve print quality 173