The fax is busy. message appears, The no fax answer. message appears – HP LaserJet Pro 200 color MFP M276nw User Manual
Page 133
●
Unplug the telephone cord from both the product and the wall, and then replug the cord.
●
Make sure that you are using the telephone cord that came with the product.
●
Plug the product phone cord into a jack for another phone line.
●
Check the phone line by using the
Run Fax Test
option from the
Service
menu on the control panel.
a. From the Home screen, touch the Setup button.
b. Open the
Service
menu.
c.
Open the
Fax Service
menu.
d. Select the
Run Fax Test
item.
The Fax is busy. message appears
●
Try sending the fax again.
●
Call the recipient to ensure that the fax machine is on and ready.
●
Check that you are dialing the correct fax number.
●
Check for a dial tone on the phone line by using the
Start Fax
button.
●
Make sure that the phone is working by disconnecting the product, plugging in a telephone to the
phone line, and making a voice call.
●
Plug the product phone cord into a jack for another phone line, and try sending the fax again.
●
Try a different phone cord.
●
Send the fax at a later time.
●
If the error persists, contact HP. Se
that came in the product box.
The No fax answer. message appears
●
Try to resend the fax.
●
Call the recipient to ensure that the fax machine is on and ready.
●
Check that you are dialing the correct fax number.
●
Unplug the product telephone cord from the wall, plug in a telephone, and then try making a
voice call.
●
Plug the product phone cord into a jack for another phone line.
●
Try a different phone cord.
●
Make sure that the phone cord from the wall telephone jack is plugged into the line port.
ENWW
Solve fax problems
117