Enable or disable the at very low settings – HP LaserJet Pro 200 color MFP M276nw User Manual

Page 157

Print when a toner cartridge is at estimated end of
life

Supply-related notifications are communicated on the product control panel, Desktop Alerts, software

applications, and network alerts.

A Low message—where is the color toner cartridge: The product indicates when

a supply level is low. Actual cartridge life remaining might vary. Consider having a replacement

available to install when print quality is no longer acceptable. The supply does not need to be replaced

now.

A Very Low message—where is the color toner cartridge: The product

indicates when a supply level is very low. Actual cartridge life remaining might vary. Consider having

a replacement available to install when print quality is no longer acceptable. The supply does not need

to be replaced now unless the print quality is no longer acceptable. Once an HP supply has reached

Very Low, HP’s Premium Protection Warranty on that supply has ended.

Print-quality problems can occur when using a toner cartridge that is at its estimated end of life. The

supply does not need to be replaced at this point in time unless the print quality is no longer

acceptable.

NOTE:

Using the

Continue

setting allows printing beyond Very Low without customer interaction and

can result in unsatisfactory print quality.

Enable or disable the At Very Low settings

NOTE:

This section applies to the HP LaserJet Pro 200 color M276nw MFP model only.

You can enable or disable the default settings at any time, and you do not have to re-enable them

when you install a new toner cartridge.

From the Home screen on the control panel, touch the Setup button.

Open the following menus:

●

System Setup

●

Supply Settings

●

Black Cartridge

Color Cartridges

●

Very Low Setting

Select one of the following options:

●

Select the

Continue

option to set the product to alert you that the toner cartridge is very low,

but to continue printing.

●

Select the

Stop

option to set the product to stop printing (including printing faxes) until you

replace the toner cartridge.

●

Select the

Prompt

option (the default option) to set the product to stop printing (including

printing faxes) and prompt you to replace the toner cartridge. You can acknowledge the

ENWW

Print when a toner cartridge is at estimated end of life

141