HP 3PAR Application Software Suite for VMware Licenses - Manual (Page 38)

1. Click Edit.
The Edit Configuration dialog box appears.
Figure 13 vCenter Plug-in configuration
NOTE: You can change the Debug level. However, to change the Recovery Manager server
name or the Recovery Manager service TCP port, you must run the HP Insight Control for
VMware vCenter Server installation again, to modify the settings.
The Configuration tab fields are shown in Table 1 (page 38) .
Table 1 Configuration tab fields
Description Field Group
The network host of the server where HP
3PAR Management Plug-in and Recovery Recovery Manager server name Configuration
Manager Software for VMware vSphere is
installed. The vCenter Server and all
desktops running the vSphere client using
the HP 3PAR plug-in must be able to reach
this server. The name is used while
registering the HP 3PAR plug-in with the
vCenter Server.
The fully qualified name of the DNS name
of the running server is the default name.
The name can be changed to any name or
IP address during the installation.
The network port number that the
TpdVmWebService Web service uses. for Recovery Manager Server TCP port
secure connections. This can be changed
to any unused port.
The TCP port numbers change based on
the modules that you have selected during
installation of Insight Control for vCenter.
HP 3PAR Management Plug-in and
Recovery Manager Software for VMware Secure service
vSphere uses a secure Web service (using
SSL certificates) securing all interactions
between the VMware components (vCenter
Server and vSphere clients) and HP 3PAR
Management Plug-in and Recovery
Manager Software for VMware vSphere.
38 Modifying configuration settings using HP 3PAR RMV Admin Tool