HP StorageWorks X3000 Network Storage Systems - Manual (Page 38)

Figure 14 Systems Insight Display LEDs
.
Table 10 Systems Insight Display LED descriptions
Status Item / Description
Green = Network link
Flashing green = Network link and activity
Off = No link to network. If the power is off, view the rear panel RJ-45
LEDs for status (see “
HP X1800 Network Storage System and X3800
Network Storage Gateway rear panel LEDs and buttons ” on page 35).
1. NIC link/activity LED
To determine Power cap status, see “ Systems Insight Display LED combin-
ations ” on page 39.
2. Power cap
Green = AMP mode enabled
Amber = Failover
Flashing amber = invalid configuration
Off = AMP modes disabled
3. AMP status
Off = Normal
Amber =Failure
For detailed information on the activation of these LEDs, see “
Systems
Insight Display LED combinations ” on page 39.
All other LEDs
Storage system component identification 38