HP StorageWorks X3000 Network Storage Systems User Manual
HP Storage
This manual is related to the following products:
Table of contents
Document Outline
- HP StorageWorks X1000 and X3000 Network Storage System user guide
- Table of Contents
- About this guide
- 1 Installing and configuring the server
- Setup overview
- Check kit contents
- Locate and record the serial number
- Install the storage system hardware
- Access the storage system
- Power on the server and log on
- Configure the storage system using the HP StorageWorks Rapid Startup Wizard
- Complete system configuration
- Additional access methods
- Default storage settings
- 2 Storage system component identification
- HP X1400 Network Storage System and X3400 Network Storage Gateway hardware components
- HP X1600 Network Storage System hardware components
- HP X1800 Network Storage System and X3800 Network Storage Gateway hardware components
- SAS and SATA hard drive LEDs
- Systems Insight Display LEDs
- Systems Insight Display LED combinations
- 3 Administration tools
- 4 Storage management overview
- 5 File server management
- File services features in Windows Storage Server 2008
- File services management
- Volume shadow copies
- Folder and share management
- File Server Resource Manager
- Other Windows disk and data management tools
- Additional information and references for file services
- 6 Cluster administration
- Cluster overview
- Cluster terms and components
- Cluster concepts
- Cluster planning
- Preparing for cluster installation
- Cluster installation
- Configuring cluster service software
- Cluster groups and resources, including file shares
- Print services in a cluster
- Advanced cluster administration procedures
- 7 Troubleshooting, servicing, and maintenance
- 8 System recovery
- A Regulatory compliance notices
- Index