HP StorageWorks X3000 Network Storage Systems - Manual (Page 25)

NOTE:
In the HP Array Configuration Utility (ACU), logical disks are labeled 1 and 2. In Microsoft Disk
Manager, logical disks are displayed as 0 and 1. For HP Smart Array configuration information, see
http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/ .
If the operating system has a failure that might result from corrupt system files, a corrupt registry, or
the system hangs during boot, see “
System recovery ” on page 109.
Default boot sequence
The BIOS supports the following default boot sequence:
1. DVD-ROM
2. HDD
3. Bootable USB flash drive
4. PXE (network boot)
Under normal circumstances, the storage systems boot up from the OS logical drive.
• If the system experiences a drive failure, the drive displays an amber disk failure LED.
• If a single drive failure occurs, it is transparent to the OS.
X1000 and X3000 Network Storage System 25