HP StorageWorks X3000 Network Storage Systems - Manual (Page 37)

Status 2. Online/activity LED
(green) 1. Fault/UID LED (am-
ber/blue)
Do not remove the drive. Removing a drive may
terminate the current operation and cause data loss.
The drive is part of an array that is undergoing ca-
pacity expansion or stripe migration, but a predictive
failure alert has been received for this drive. To
minimize the risk of data loss, do not replace the
drive until the expansion or migration is complete.
Flashing regularly (1 Hz)
Amber, flashing regularly (1
Hz)
Do not remove the drive. Removing a drive may
terminate the current operation and cause data loss.
The drive is rebuilding, or it is part of an array that
is undergoing capacity expansion or stripe migra-
tion.
Flashing regularly (1 Hz) Off
The drive is active, but a predictive failure alert has
been received for this drive. Replace the drive as
soon as possible.
Flashing irregularly
Amber, flashing regularly (1
Hz)
The drive is active, and it is operating normally. Flashing irregularly Off
A critical fault condition has been identified for this
drive, and the controller has placed it offline. Re-
place the drive as soon as possible.
Off Steadily amber
A predictive failure alert has been received for this
drive. Replace the drive as soon as possible.
Off
Amber, flashing regularly (1
Hz)
The drive is offline, a spare, or not configured as
part of an array.
Off Off
Systems Insight Display LEDs
The HP Systems Insight Display LEDs represent the system board layout. The display enables diagnosis
with the access panel installed.
X1000 and X3000 Network Storage System 37