beautypg.com

Enabling the dedicated ilo management port – HP ProLiant ML110 G7 Server User Manual

Page 51

background image

Hardware options installation 51

5.

Using a flat screwdriver, toggle the knockout to loosen it, and then pull it out of the chassis.

6.

Install the dedicated iLO management module.

7.

Install the access panel (on page

21

).

8.

Lock the tower bezel.

9.

Connect each power cord to the server.

10.

Connect each power cord to the power source.

11.

Power up the server (on page

19

).

Enabling the dedicated iLO management port

The onboard NIC 1/shared iLO connector is set as the default system iLO port.
To enable the installed dedicated iLO module:

1.

During the server startup sequence after module installation, to access iLO RBSU, press the F8 key.

See also other documents in the category HP Computer hardware: