Installing the operating system, Registering the server – HP ProLiant ML110 G7 Server User Manual
Page 29
Setup 29
•
Press the F9 key when prompted during the boot process to change the server settings using RBSU. The
system is set up by default for the English language.
For more information on the automatic configuration, refer to the HP ROM-Based Setup Utility User Guide
located on the Documentation CD.
Installing the operating system
To operate properly, the server must have a supported operating system installed. For the latest information
on supported operating systems, see the HP website
Methods to install an operating system on the server include:
•
SmartStart assisted installation—Insert the SmartStart CD into the DVD-ROM drive and reboot the
server.
•
Manual installation—Insert the operating system CD into the DVD-ROM drive and reboot the server. You
might have to obtain additional drivers from the HP website
For more information, see the SmartStart installation poster in the HP ProLiant Essentials Foundation Pack
included with the server.
Registering the server
To register the server, see the HP Registration website