HP Intelligent Management Center Licenses - Manual (Page 96)

Modify SNMP Settings
Modify SNMP settings for a device based on device ID.
Interface URI
/plat/res/device/{id}/updateSnmp
Access Method
HTTP
PUT
Parameters
Path parameter
Device ID. id
Long integer type. Required. No default value.
Message body
SNMPv1
public
private
10
10
or
159
Element description
device sub-elements
SNMP parameters. snmpParameter
Element type. See the following description.
SNMP template ID. snmpTmplId
Integer type. If both snmpTmplId and snmpParameter exist, snmpParameter is preferred, and
snmpTmplId is omitted.
snmpParameter sub-elements
Parameter type. Valid values: SNMPv1, SNMPv2c, SNMPv3 No-Priv No-Auth, SNMPv3 No-Priv
Auth-Md5, SNMPv3 No-Priv Auth-Sha, SNMPv3 Priv-Des Auth-Md5, SNMPv3 Priv-Des Auth-Sha, paraType
SNMPv3 Priv-Aes128 Auth-Md5, SNMPv3 Priv-Aes128 Auth-Sha, SNMPv3 Priv-Aes192 Auth-Md5,
SNMPv3 Priv-Aes192 Auth-Sha, SNMPv3 Priv-Aes256 Auth-Md5, and SNMPv3 Priv-Aes256 Auth-Sha.
String type. Optional. If the element does not exist, the value is not changed. If the element exists,
the value cannot be null.
Read-only community name. roCommunity
String type. Optional. If the element does not exist, the value is not changed. If the element exists,
the value cannot be null.
96 Network Resource Management