HP Intelligent Management Center Licenses - Manual (Page 37)

Operator elements
Authentication type. authType
Integer type. 0: simple password authentication. 1: RADUIS authentication. 2:LDAP
authentication. It is required when you add or modify an operator.
Operator password. password
String type. It is required when you add or modify an operator if the authentication type is
0.
Idle timeout. sessionTimeout
Integer type, in the range of 1 to 9999999. When you add or modify an operator without
setting this parameter, the system parameter will take affect.
OperatorGroup ID. operatorGroup
Long integer type. It is required when you add or modify an operator.
Default value of operator ACL control. default Acl
Integer type, 0 refers to permission and 1 refers to disable. It is required when you add or
modify an operator.
Operator ACL List. operatorAclList
Operator ACL information list. It is optional when you add or modify an operator.
Operator ACL information. operatorAcl
Suboption startlp refers to the start IP, the string type, and the required option.
Suboption endlp refers to the end IP, the string type, and the required option.
Subotion authType refers to the access type, the integer type, 0 referring to permission and
1 referring to restriction and the required option.
Suboption desc refers to descriptions, the string type, and the optional item.
Suboption aclOrder refers to priority, the integer type, and the required option.
Operator Group information. operatorGroup
Function link. It is not required when you add or modify a group and it is contained in the
response message when you query a group.
Query Individual Operators 37