HP Intelligent Management Center Licenses - Manual (Page 55)

Query Device Information List
Query device information based on predefined criteria.
Interface URI
/plat/res/device
Access Method
HTTP
GET
Parameters
Query parameter
Filter resources by access right. resPrivilegeFilter
Boolean type. Optional. The default value is false.
Device type. category
Integer type. Optional. No default value. Valid values can be obtained through SNMP Template
Query Interfaces.
Device label. label
String type. Wildcards are supported. Optional. No default value.
Device IP address. ip
String type. Wildcards are supported. Optional. No default value.
MAC address. mac
String type. Wildcards are supported. Optional. No default value.
Device status. status
Integer type. Optional. No default value. For valid values, see “ Device status description .”
Device status. series
Integer type. Optional. No default value. Valid values can be obtained through Device Series
Query Interfaces.
Contact. contact
String type. Wildcards are supported. Optional. No default value.
Device location. location
String type. Wildcards are supported. Optional. No default value.
Location of the first returned record in the query result. start
Integer type. Optional. The default value is 0. If the input value is smaller than 0, the default
value is used.
Total returned records. size
Integer type. Optional. The default value is 10. If the input value is smaller than 0, the default
value is used.
Sort field of the returned result. orderBy
String type. Optional. The default value is id. Valid values include id, label, ip, mask, status,
contact, location, sysoid, and sysName.
Sort records in descending order. desc
Query Device Information List 55