HP Intelligent Management Center Licenses - Manual (Page 322)

Modify Unmanaged Device Filtering Rule Status
Modify the status of the filtering rule for unmanaged devices.
You can switch between the Enabled state and the Disabled state.
Interface URI
/syslog/filter/currentUnmanagedDeviceRuleState/{id}
Access Method
HTTP
PUT
Parameters
Path parameters
Status ID. id
Integer type. No default value. Valid values include 0 and 1.
Returned Result
Status codes
•
204 (No Content): Success.
Example
Change the status of the filtering rule for unmanaged devices to 1, which indicates the Enabled
state.
Request
PUT http://imc_host:8080/imcrs/syslog/filter/currentUnmanagedDeviceRuleState/1
accept: application/xml
...
Response
HTTP/1.1 204 No Content
...
The message body is empty.
322 Network Syslog Management