beautypg.com

Monitoring, Viewing video images at the target station – Aiphone IS User Manual

Page 36

background image

36

Monitoring

You can monitor a sub station or multiple sub stations in your
site sequentially (scan-monitoring) with a master station.

When monitoring a video door station, you can view the

*

image at the station and hear the sound. When monitoring an
audio door station or room sub station, you can only hear the
sound at the station.

Monitoring

Search for and select the sub station in your site that

1

you want to monitor (so that it is highlighted) in one of

the search methods. (→P. 28-34)

NOTE:

You cannot monitor a master station and remote site.

Press

2

MONITOR (when "[

] MONI" is displayed).

You can hear the sound and if the station has a camera,

you can also view the image.

Press

3

OFF to fi nish monitoring.

NOTES:

If the selected station is being used (calling, communicating, being

monitored, etc.), you cannot monitor the station.

If you press

TALK or lift the handset while monitoring, the

communication mode starts with the station after a tone.

During video monitoring, you can switch Zoom/Wide, make Pan

& Tilt control and adjust images on the monitor. (

P. 24-25)

To shift to scan-monitoring

Press

MONITOR

during monitoring.

If the station being monitored is a preset one for scan-

*

monitoring, the scan-monitoring starts from the subsequent
station in the scan-monitoring order.
If the station being monitored is not a preset one for scan-

*

monitoring, the scan-monitoring starts from the fi rst station in
the scan-monitoring order.

Scan-monitoring

You can monitor the preset stations in your site (up to 20 door
stations and/or room sub stations) sequentially, each for the set
duration.

The stations should be preset in the System setting on a PC.

*

Press

1

MONITOR in the standby mode.

The stations set for scan-monitoring are monitored

sequentially, each for the set duration.

If the scan-monitoring lasts 10 minutes, the backlight of

*

the master station monitor will be turned off.
Pressing any key will turn on the backlight again.
If the scan-monitoring target station is only one, the scan-

*

monitoring ends after a lapse of approx. 11 minutes.

Press

2

OFF to stop scan-monitoring.

To monitor only the desired station continuously:

Press

MONITOR

when the target station is being

monitored during scan-monitoring.

Press

*

MONITOR

again to restart the scan-monitoring.

NOTES:

Pressing

TALK is invalid during scan-monitoring.

If the handset is lifted during scan-monitoring, the scan-monitoring

is continued and sounds at the target station can be heard from the
handset, and when the handset is hung up or

OFF

is pressed, the

scan-monitoring ends.

If the master station receives a call during scan-monitoring, the

scan-monitoring ends automatically.

If one of the preset stations is being used (calling, communicating,

being monitored, etc.) during the scan-monitoring, it will be
skipped.

During the scan-monitoring, the Zoom/Wide, Pan & Tilt, door

release and image adjusting functions are disabled. (The camera is
fi xed in the Wide mode.)

Viewing video images at the target station

When you are receiving a call from, communicating with a
video door station, or monitoring a video door station in your
site, you can view video images at the target station.

Use the following functions on the master station to control
video images as you prefer. (→P. 24-25)

Switching Zoom/Wide

Pan & Tilt

Adjusting images

NOTE:

Video images cannot be controlled during scan-monitoring.