Aiphone IS - Manual (Page 13)

13
GETTING STARTED
USING THE SYSTEM
APPENDIX
SETTING AND ADJUSTMENT
Paging
On a master station, you can initiate paging or chime paging to the selected zone(s). All the stations previously registered to the
zone(s) receive the paging or chime. (→P. 37)
You can also call another master station or a sub station in your site individually by direct voice call. The receiver can reply in the *
hands-free mode.
You can also make paging or chime paging to the registered external speaker(s).
*
You can also make paging to the pilot zone in a remote site, or chime paging to the pilot zone in a remote site when the site has *
chime sources. (The chime paging does not commence when the site does not have a central control unit.)
Monitoring
On a master station, you can monitor a sub station in your site.
You can also initiate the scan-monitoring (monitoring multiple preset stations sequentially).
For an audio door station or room sub station, you can monitor sounds only.
(→P. 36)
You cannot monitor or scan-monitor a remote site. *
Master station Master stations
Room sub stations
Door stations
Paging or chime paging
Room sub station
or or
Door station (video) Door station (audio) Master station
Monitoring
Operation
Target
In your site
(standard (IP) system)
In a remote site
(standard (IP) system)
In a remote site
(network direct system)
Monitoring ✓ — —
Scan-monitoring ✓ — —
✓ : Possible — : Impossible
Operation
Target
In your site
(standard (IP) system)
In a remote site
(standard (IP) system)
In a remote site
(network direct system)
Paging ✓ ✓ ✓
Chime paging ✓ ✓ —
Scheduled chime paging (automatic) ✓ — —
✓ : Possible — : Impossible