Aiphone IS - Manual (Page 22)

22
Answering a call
The maximum duration of communication is preset in the
System setting. (It can be set to a maximum of 10 minutes.)
Answer the call in one of the following ways. 1
■ Communication in the hands-free mode
(Available when "COMMUNICATION METHOD" is set
to "HF" in the "INITIAL SETTING")
Press 1) TALK momentarily.
After a beep, you can communicate in the hands-
free mode.
*1: When talking: (Lit)
When listening to the caller: (Off)
When you have fi nished the communication, press 2)
OFF .
Communication will end.
You can communicate in the press-to-talk mode by the *
following operation even when "HF" is set (e.g., when
it is noisy around you).
Press and hold • TALK for a few seconds while being
called. (Beeps twice and [PRIVACY] disappears
from the display.)
Press and hold
• TALK for more than one second
while communicating. (Beeps once and [PRIVACY]
disappears from the display.)
another master station>
You can talk back to it. If you press and hold TALK for
more than one second, it changes to the press-to-talk
mode. (Beeps once and [PRIVACY] disappears from
the display.)
■ Communication in the press-to-talk mode
(Available when "COMMUNICATION METHOD" is set
to "PTT" in the "INITIAL SETTING")
Press 1) TALK momentarily.
After a beep, you can communicate in the press-to-
talk mode.
Press and hold 2) TALK to talk and release to listen to
the caller.
When you have fi nished the communication, press 3)
OFF .
Communication will end.
another master station>
Press and hold TALK to talk with and release to listen
to the caller.
*1
(When talking) (When listening to the caller)
Lit Off