HP Smart Update Manager (User Guide) - Manual (Page 53)

Possible values Description Parameter
YES , NO Enables the credentials of the local
host to be used as the credentials to USECURRENTCREDENTIAL
access the targets instead of providing
the user name and password explicitly
for each target.
The assumption is that the current
credentials are valid for the targets
that are being accessed. (Applies to
Windows only.)
YES , NO Instructs HP SUM to include the
components from the HP FTP site WEBUPDATENEEDED
( ftp://ftp.hp.com ) in the list of possible
updates.
String value Use a proxy server (and port number)
to access the HP FTP site (
ftp://
ftp.hp.com ).
USEPROXYSERVER
For example, 11.22.33.44:80
Web URL (for example,
autoproxy.com
)
Include a proxy script to access the
HP FTP site (
ftp://ftp.hp.com ).
USEPROXYSCRIPT
YES , NO (default) Instructs HP SUM to delete the input
file after it has been read. DELETEINPUTFILE
OmitHost (default),
OmitComponent , Force
This parameter instructs HP SUM how
to proceed when a component has a
failed dependency. ONFAILEDDEPENDENCY
The default of OmitHost causes the
host to be put in a failure state, and
no installation is attempted on it.
OmitComponent clears the affected
components and proceeds with any
updates that do not have dependency
failures. Force attempts all updates,
even if they have dependency failures.
IP address, DNS name This parameter is the IP address or the
DNS name of a remote server, remote HOST
iLO NIC port, Virtual Connect Ethernet
or Fibre Channel Module for c-Class
BladeSystem, or BladeSystem OA.
When two OAs are in an enclosure,
this parameter is the active OA. When
specifying the IP address, you can use
either the IPv4 or IPv6 format.
This parameter specifies an already
defined group name in the HP SUM
GUI.
Logs in to the target hosts with your
user ID. UID
Uses the password for the user ID
specified in the UID. PWD
The password is used to log in to
target hosts.
Log file name Redirects the output from HP SUM or
the HP BladeSystem c-Class OA flash LOGFILENAME = "path"
utility to a different directory than the
default location.
Input files 53