Aastra Telecom SIP 57I - Manual (Page 41)

Firmware and Configuration Files
41-001160-00, Release 2.1, Rev 04 1-23
Overview
Overview Installing the Firmware/Configuration Files
The following procedure describes how to install the firmware and configuration
files.
Step Action
1 If DHCP is disabled, manually enter the configuration server’s IP address. For details on manually
setting DHCP, see Chapter 4, the section
“DHCP” on page 4-4 .
2 Copy the firmware file .st to the root directory of the configuration server. The IP
phone accepts the new firmware file only if it is different from the firmware currently loaded on the IP
phone.
Note: The attribute is the IP phone model (i.e., 53i.st, 55i.st)
3 Copy the Aastra configuration files (aastra.cfg and .cfg) to the root directory of the
configuration server.
Note: The attribute represents the actual MAC address of your phone.
(i.e., 00085D030996.cfg).
4 Note: Restart the IP phone as described in Chapter 3, “Restarting Your Phone” on page 3-13 .