Aastra Telecom SIP 57I - Manual (Page 383)

Operational Features
41-001160-00, Release 2.1, Rev 04 5-173
Configuring Operational Features
Operational IP Phone Features
4 In the "Number of Rings" field, enter the number of rings you want your phone to ring before the call
is forwarded.
Valid values are 1 to 9.
Note: "Number of Rings" field applies to No Answer and Busy No Answer modes only.
5 Click to save your changes.
For per-line configuration of call forwarding
6 Select a line to configure Call Forwarding on.
7 In the "Mode" field, select the mode you want to set on your phone.
Valid modes are:
• Off
• All
• Busy
• No Answer
• Busy No Answer
• Global
Notes:
1. To disable call forwarding in the Aastra Web UI, set the mode to OFF and remove the phone
number in the "Number" field.
2. To force a line to use the global settings, set the "Mode" field to Global.
8 In the "Forward Number" field, enter the destination number for which you want your calls on this
line to be call forwarded.
9 In the "Number of Rings" field, select the number of rings you want this line to ring before the call is
forwarded.
Valid values are 1 to 9.
Note: "Number of Rings" field applies to No Answer and Busy No Answer modes only.
10 Click to save your changes.
Aastra Web UI