Configuring the ip phones – Aastra Telecom SIP 57I User Manual
Page 133
Network Settings
41-001160-00, Release 2.1, Rev 04
4-9
Configuring Network and Session Initiation Protocol (SIP) Features
Configuring the IP Phones
•
Secondary DNS
You can configure the network settings using the configuration files, the IP phone
UI, or the Aastra Web UI.
Note:
If you disable DHCP on the phone, the phone uses the TFTP
protocol as the default server protocol. If you want to specify a different
protocol to use, see
“Configuration Server Protocol”
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
on
IP Phone UI
Step Action
1
Press
on the phone to enter the Options List.
2
Select Administrator Menu.
3
Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4
Select Network Settings.
5
Select IP Address and enter the IP address of the phone.
6
Select Subnet Mask and enter the subnet mask.
7
Select Gateway and enter the gateway address.
8
Select DNS and enter a Primary and/or Secondary DNS server.
9
Press Done to save the changes.
The IP phone is manually configured.