Canon imagePROGRAF iPF8400S - Manual (Page 364)

• G Scaling
Resizes the document image based on a specified scaling value. Enter a value in a range of 5–600.
• H Borderless Printing
Borderless printing is available if roll paper is selected in the A Paper Source list.
Activate this setting for borderless printing to match the size and width of the paper.
• Borderless Printing by Resizing Originals to Fit the Roll Width
➔ P.92
• Borderless Printing at Actual Size
➔ P.81
• J Print Centered
Select this checkbox to print document images in the center of the paper.
• Printing Originals Centered on Rolls
➔ P.128
• Printing Originals Centered on Sheets
➔ P.133
• K No Spaces at Top or Bottom
Select this checkbox to print the next image skipping blank areas above and below printable data in documents,
which enables you to conserve the paper.
• Conserving Roll Paper by Printing Originals Without Top and Bottom Margins
➔ P.141
• L Rotate Page 90 degrees
Select this checkbox to rotate the document image by 90 degrees before printing.
• Conserving Roll Paper by Rotating Originals 90 Degrees
➔ P.138
• N Free Layout
Select this checkbox to start imagePROGRAF Free Layout before printing.
This allows you to print multiple documents next to each other.
Important
• When Print Preview is selected on the Main panel, Print Preview is disabled.
• Printing Multiple Originals Next to Each Other
➔ P.112
Additional Settings Pane Additional Settings Pane
The following settings are available on the Additional Settings pane.
• A Send job to
You can configure the method for saving print jobs to the printer hard disk.
Additional Settings Pane iPF8400S
User's Guide
Mac OS Software
Printer Driver
364