Canon PIXMA iP100 - Manual (Page 51)

47 Routine Maintenance
4
Install the ink tank.
(1) Insert the front end of the ink tank into the Print
Head by aligning the mark on the ink tank
with the mark on the Print Head Holder.
(2) Press on the mark on the ink tank until
the ink tank snaps firmly into place.
(3) Make sure that the ink lamp lights up red.
Important
z Install both ink tanks to print. The printer cannot be used unless both ink tanks are installed.
z If the front (innermost) part of the ink tank (A) is sticking up, push down on the Canon logo on
the ink tank as illustrated below. Do not remove the ink tank forcibly.
(3) (2)
(1)
(A)