Canon imageCLASS MF4890dw - Manual (Page 31)

31
Co
py
Copy by Saving Paper
You can save paper with [ ] (Paper Save Copy) when making a copy.
1
Place your documents (
→
p.19)
2
Press [ ] (Paper Save Copy).
3
Press [
▲
] or [
▼
] to highlight the desired dcombination option, and then
press [OK].
<2 on 1 1
→
2-Sided>* Copy two pages onto each of both sides of paper.
<4 on 1 1
→
2-Sided>* Copy four pages onto each of both sides of paper.
<2 on 1 1
→
1-Sided> Copy two pages onto one side of each paper..
<4 on 1 1
→
1-Sided> Copy four pages onto one side of each paper.
* MF4890dw/MF4880dw only
4
Press [
▲
] or [ ▼ ] to highlight the document size, and then press [OK].
•
If a document is placed on the platen glass, you may specify the scan size as
size, but the actual size is size.
5
Press [ ] (Start).
When placing your
documents in the feeder
Copying starts automatically.
When placing your
documents on the
platen glass
1. Place the next page on the platen glass, and then
press [ ] (Start).
•
Press [ ] (Start) for every scanning.
2. After scanning all your documents, press [
▲
] or [
▼
]
to highlight , and then press [OK].
Enlarge or Reduce Copies
Enlarge or reduce copies using preset copy ratios or custom copy ratios.
1
Place your documents (
→
p.19).
2
Switch to the Copy mode (
→
p.16).
3
Press [
▲
] or [
▼
] to highlight , and then press [OK].
4
Press [
▲
] or [
▼
] to highlight the desired ratio, and then press [OK].
•
If you want to set a copy ratio in 1% increments, select <Custom Ratio>, and then
enter the copy ratio using the numeric keys or press [
▲
] or [
▼
] to specify the ratio.
Copy Ratio
Custom Ratio
100% Direct
400% Max
200%
5
Press [ ] (Start).