Canon imageCLASS MF4890dw - Manual (Page 16)

16
Switch to Copy/Fax/Scan Mode
Switch to Copy, Fax, or Scan mode fi rst to use each mode.
•
If you use the Fax mode for the fi rst time:
Fax setup guide will appear on the display. Refer to the on-screen instructions and Starter Guide to confi gure
the settings.
•
To set a frequently used mode to the standby mode:
Press [ ] (Menu)  <Preferences>  <Display Settings>  <Select Default Screen>  Select the
screen  [OK].
•
To specify how long the machine waits before returning to standby mode:
Press [ ] (Menu)  <Timer Settings>  <Auto Reset Time>  Specify the time  [OK].
Specify destination.
01/01/2012 12:52AM
RX Mode: Auto
Resolution: 200 x 1
...
Select the scan type.
Computer
Remote Scanner
Fax Mode
Scan Mode
Displays the recipient’s number.
To change the settings:
1. Press [
▲
] or [ ▼ ] to highlight an item, and
then press [OK].
2. Press [
▲
], [ ▼ ], [ ◄ ] or [ ► ] to specify the
values, and then press [OK].
To select the scan method:
Press [
▲
] or [ ▼ ] to highlight an item, and
then press [OK].
Copy: Press Start
100% LTR
Density: 0
Original Type: Text
...
2-Sided: Off
1
+
-
01
Copy Mode
Displays the copy ratio, paper source,
paper size, and number of copies.
To change the settings:
1. Press [
▲
] or [ ▼ ] to highlight an item, and
then press [OK].
2. Press [
▲
], [ ▼ ], [ ◄ ] or [ ► ] to specify the
values, and then press [OK].
If you do not operate the machine for a while, the machine
returns to the Copy mode (standby mode) automatically.
Press the desired mode key.