Canon ImageCLASS MF7480 - Manual (Page 90)

2‑23
Original and Paper
When entering the value in millimeters,
you can also change the value by
pressing [‑] or [+] in increments of
1.0 mm, even if you have entered the
value.
If you enter a value outside the setting
range, [OK] is grayed out and cannot be
selected. Enter an appropriate value.
You can use values for [X] between 5
7/8" (148 mm) and 17" (432 mm), and
for [Y] between 3 3/4" (95 mm) and 11
11/16" (297 mm).
3
4
① Select the desired paper type.
② Press [OK].
When printing on special types of paper,
such as heavyweight paper, be sure to
correctly set the paper type, especially
if you are using heavyweight paper. If
the type of paper is not set correctly,
it could adversely affect the quality of
the image. Moreover, the fixing unit
may become dirty and require a service
repair, or the paper could jam.
If you select [Irreg. Size], you cannot use
the 1
▶2‑Sided, 2▶2‑Sided, or Book▶2‑
Sided mode.
–
–
–
–
–
②
①
②
①
If you want to select an envelope
size:
1
2
① Select the envelope type.
② Press [OK].
If the envelope type is not selected
correctly, a paper jam may occur.
If you select [Envelope], you cannot use
the 1
▶2‑Sided, 2▶2‑Sided, Book▶2‑
Sided, 2‑page Separation, or Image
Combination mode.
3
[Transparency] can be selected only if
[LTR] is selected as the paper size.
●
–
–
①
②
①
②