Canon ImageCLASS MF7480 - Manual (Page 344)

12‑15
Machine Settings
Communications Settings
Received Page Footer Sets whether to insert the machine’s fax number and the
sender information on received faxes.
Off
On
–
–
Continue Printing When
Toner Is Out Sets whether the machine continues printing received
documents and reports when it is running out of toner. If you
set the machine not to continue printing, the machine stops
printing when the toner starts to run out, and automatically
stores the received documents in memory.
Off
On
–
–
Fax Settings Sets the fax features.
User Settings Specifies the basic operation settings in the fax mode.
Unit Telephone # Registers your fax number (max. 20 characters, including
spaces). (See “Set the Machine for Sending Documents,” in
the Starter Guide.)
Tel Line Type Selects the telephone line type. (See “Set the Machine for
Sending Documents,” in the Starter Guide.)
Pulse
Tone
–
–
Monitor Volume Control Sets the volume for the monitor tone that this machine
sounds during a fax transmission.
TX Settings Sets the transmission features.
ECM TX Sets whether the ECM (Error Correction Mode) transmission
is activated.
On
Off
–
–
Pause Time Sets the pause time when you insert pause into the dialing
sequence. (1sec−15sec)