Canon ImageCLASS MF7480 - Manual (Page 306)

11‑9
Troubleshooting
3
Use the green tab to lift up the exit
slot cover and remove any jammed
paper.
4
While holding down the lever on
the right corner of the fixing unit,
open the upper cover of the fixing
unit and remove any jammed
paper.
5
Remove any jammed paper that is
protruding from the lower part of
the fixing unit.
The parts inside the fixing unit are subject to
high‑temperatures. When removing jammed
paper, take care not to touch anything in this
area, except the upper cover.
6
Push up the green fixing lever.