Canon ImageCLASS MF7480 - Manual (Page 108)

3‑11
Copying
Original Type Selection
Combinations of these three modes (Text, Text/Photo, and Photo) cannot be selected at the same time. If you
select one of these modes, the previously set mode is canceled.
If you make copies of an original containing halftones, such as a printed photograph, using the Photo mode,
the moiré effect (a shimmering, wavy pattern) may occur. In this case, you can lessen the moiré effect by
using the Sharpness mode. (See chapter 3, “Copying,” in the Reference Guide.)
If you select the Automatic Exposure Adjustment mode, the original type mode is grayed out and fixed to
Text mode. If you select the Text/Photo or Photo mode, the exposure can only be adjusted manually.
If the original is a transparency, select the original type, then adjust the exposure to the most appropriate
level for the original. –
–
–
–
1
Press (COPY).
2
Place your originals.
3
① Press .
4
① Select the original type.
① ①
5
Press (Start).
To cancel all settings and return the machine
to the Standard mode, press (Reset).