beautypg.com

Cop y – Canon EOS C300 User Manual

Page 68

background image

White Balance

68

• The selected value will be displayed on the Wi-Fi Remote screen and will be applied on the camcorder.

If you selected ÅA or ÅB:

3 Point the camcorder at a white object so that it fills the whole screen.

• Use the same lighting conditions you plan to use when recording.

• Make sure the white object fills the screen until the procedure is completed.

4 Press [Å].

• If a custom white balance has not yet been stored, [Å] will flash slowly.

• During the procedure, [Å] will flash quickly. When it stops flashing, the procedure is completed and the

setting will be applied on the camcorder.

NOTES

• Using the custom white balance setting:

- Readjust the custom white balance if you turn the ND filter on/off or when the light source has changed.
- Very rarely and depending on the light source, Å may keep flashing (it will change to a slow flashing). You

can still use the setting even in such case.

White balance fine-tuning

Color temperature

COP

Y

This manual is related to the following products: