Canon EOS C300 - Manual (Page 102)

Custom Picture Settings
102
3 Change the setting to the desired level and then press SET.
• Refer to the table Available Custom Picture Settings (A 104) for details on the various settings.
• Repeat steps 2 and 3 for other settings, as necessary.
4 Press the CUSTOM PICTURE button to exit the custom picture menu and apply the new custom
picture settings.
Resetting the current file’s settings to default values
1 Select [Reset] and then press SET.
2 Select the default values and then press SET.
• Select [NEUTRAL] to reset to neutral default values (equivalent to not using custom picture settings at all) or
[CINEMA] or [EOS Std.] if you want to replicate these preset settings, for example as a starting point to edit
them further.
3 Select [OK] and then press SET.
Renaming Custom Picture Files
1 After selecting a file, open the [Rename] submenu.
[, / Edit File] > [Rename]
• A screen appears that displays the current file name with an orange
selection frame on the first character.
2 Select an alphanumeric character or symbol then move (Ð) to the next field.
• Change the rest of the name in the same way.
3 Select [Set] and then press SET.
4 Press the CUSTOM PICTURE button to exit the custom picture menu and apply the selected custom
picture settings.
Protecting Custom Picture Files
Protecting a custom picture file prevents its settings from being
accidentally changed.
1 After selecting a file, open the [Protect] submenu.
[, / Edit File] > [Protect]
2 Select [Protect] and then press SET.
• In the custom picture menu, i will appear next to the file name.
• To remove protection settings, select [Unprotect] instead.
3 Press the CUSTOM PICTURE button to exit the custom picture menu and apply the selected custom
picture settings.
Transferring Custom Picture Files
You can transfer custom picture files between the camcorder and SD card. When the custom picture file is in the
camcorder, use [Copy To *] or [Load From *] depending on the operation you wish to perform. Similarly,
when the custom picture file is on an SD card, use [Copy To Cam.] or [Load From Cam].
[, / Edit File]
[Rename]
[, / Edit File]
[Protect]
COP
Y