Loading plain paper / photo paper – Canon PIXMA iP8750 User Manual

Page 59

Loading Plain Paper / Photo Paper

You can load plain paper or photo paper.

Important

• If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) to perform trial

print, it can cause paper jams.

Note

• We recommend Canon genuine photo paper for printing photos.

For details on the Canon genuine paper, see

• You can use general copy paper.

For the page size and paper weight you can use for this printer, see

1. Prepare paper.

Align the edges of paper. If paper is curled, flatten it.

Note

• Align the edges of paper neatly before loading. Loading paper without aligning the edges may

cause paper jams.

• If paper is curled, hold the curled corners and gently bend them in the opposite direction until the

paper becomes completely flat.

For details on how to flatten curled paper, see "Load the paper after correcting its curl." in

• When using Photo Paper Plus Semi-gloss SG-201, even if the sheet is curled, load one sheet at a

time as it is. If you roll up this paper to flatten, this may cause cracks on the surface of the paper
and reduce the print quality.

2. Load paper.

1. Open the paper support, and pull it out.

2. Open the front cover gently.

Important

• If the disc tray guide (A) is open, close it.

3. Pull out the paper output tray.